For the analogue purist, the combination of a good valve amplifier and a good turntable is the closest possible approach to the original recording. There are two options for adding such functionality to our valve pre-amplifiers. A solid-state module is available for the standard QC-twenty four pre-amplifier (known as the QC-24 phono stage), which allows direct connection of a turntable with an internal switch to change between moving coil and moving magnet cartridges. This can be fitted as standard or added later. Specifications - Inputs (line level) 5 - Inputs (buffered tape loops) 2 - Valve complement 1 x 6111 twin triode - Total Harmonic Distortion (THD) @1 VRMS <0.2%, 0.02% @ 1W - Frequency Response 5Hz to 50kHz (+0/-0.5dB) - Hum and Noise >-80dB - Line stage gain 15dB - Recommended minimum load 50k ohms - Dimensions (H x W x D) 90 x 220 x 300mm - Phono stage Optional - Finish: Lancaster Grey